110v, 60HZ, 1/3 HP motor spins at 5 speeds from 620-3100 RPM
Press height: 22-1/2".
Sturdy 11"x 7" base.
Table tilts at a half square angle left or right for bevel drilling
6-1/2" x 6-1/2" square table elevates of 6"
1/2" capacity Morse taper chuck.

btdpmini

$38.95

Full ball bearing construction. Direct drive motor. Adjustable tool rests & eye guards. Removable wheel cover.
Motor: 110V, 1/2hp, 60HZ, 3450RPM,
1/2" arbor.
6"X3/4"X1/2" wheel.
G.W. 19 lbs.

ele-bg6-19

$29.95

Durable hardened steel construction.
Drop forged, heat treated steel safety-latch hooks.
Mechanical load brake for positive load control.
Designed to provide safe, easy and efficient lifting operations.
1 ton lift power, 1/4" diameter chain, 8ft lift capacity.

cha-h1

$29.95

Durable hardened steel construction.
Drop forged, heat treated steel safety-latch hooks.
Mechanical load brake for positive load control.
Designed to provide safe, easy and efficient lifting operations.
3/8" diameter chain, 12ft lift capacity.
Has 4 fall lines.
Mechanical load brake for positive load control.
Designed to provide safe, easy and efficient lifting operations.
Net weight:90 kg.

cha-h5

$65.95

18 V w/2- Batteries Cordless Drill
0-700 rpm
6 Adjustable Torque Settings
Includes:
Blow Mold case
6 Drill bits
6 Screwdriver bits
Drill
Two Batteries
Magnetic Bit Holder
Keyless Chuck
Weight: 7 lbs
May come in yellow

18V2battPL

ON BACK ORDER

18 Volt Drill
***Feature:
Keyless Chuck: 3/8"(10mm)
No-Load Speed: 700RPM
Max Torque: 1300N.M
6 Torqe Setting
Charger & Battery Included
1 Double End Bit
May come in Red, Blue, or Yellow
Comes in cardboard display box.

17182

$25.95

1" Hammer Drill blow molded case

This is made for drilling holes in brittle material like concrete, brick, rock, or stone This unit has a square SDS shank, that takes the slotted SDS bits. The motor is 110V, 60Hz, and is rated at 6 amps. This turns at 500 RPM and produces almost 3000 impacts per minute. Includes an adjustable side assist handle, and a depth gauge. You get a dust cover, a 4 piece drill bit set, and extra grease for lubricating.

$48.00

Everything you need right in one kit!
1/2" Impact Drill-600W
Jig-Saw MIQ-50 110v-60Hz 350W no3000r/min
Sander 93mm 160 Watt

np-drjigsan-13

$39.95

Power 500 Watts
Voltage 110 VAC
Frequency 60 Hz
No-Load Speed 3500 RPM
Max. Working Period 10 Min
Min. Resting Period 5 Min
Isolation Class B
Motor Protection IP24
Max. Saw Height 1-1/4" (34 mm)
Worktop Dimensions 15-1/2"x15-1/8" (395 mm x 385
Drip tray included
colors may vary

nw62001-25

$59.95